H&K Optic Cut - Holosun 407k/507k/EPS/EPS Carry

This is for mounting any optic with the Holoson 407k/507k/EPS/EPS Carry onto an applicable H&K®. The Holosun K-series footprint is similar to the RMSc fooprint, but doesn't havethe recoil lugs at the rear of the optic. Each H&K slide will require a unique service. As of current, here's what you can expect for your slide model:

P2000 and P30 - This slide can only be cut to a depth of 0.090" due to the lightening pocket underneath. This will also use #4-40 screw with threaded bosses, which the screws will be provided. This helps keep the most thread engagement possible and allows for two more locating features. The rear iron can stay in its OEM position, if you'd like. *Due Note, Angry bear currently does not offer irons for the P2000*.

VP9/40 - This will be cut 0.140”  deep into the slide and 0.050” in front of the OEM rear iron sight position. The holes will be drilled and tapped for #6-32 countersunk screws, which will be provided.

When shipping your slide, send the complete upper assembly, to include the barrel and recoil spring. This will allow us to verify the fit of the red-dot against the other components. If you send the slide with new iron sights, we'll install them for free. DO NOT SEND THE LOWER PART OF YOUR FRAME.

Please send your red dot with your slide. From our experience, every red dot is a little unique. We want to ensure you get the best possible fit.

**NOTE** Due to the design of the iron sights, there is potential of damaging them during removal, particularly the front iron sight. We'll do the best we can to protect the sights, but we will not be held responsible for replacing them if damaged. If you choose to have your rear iron relocated in front of your optic. it will be cut to a glock style iron. For the best possible service, Please inlcude or inquire about getting some new ones installed at the same time.

Check out our Shipping & Dropoff page for details on lead-time and how to ship items to us. 

To keep things simple, we've chosen to use these cerakote colors:

- Blackout E-100

- FDE H-265

- OD Green H-236

- Burnt Bronze H-148

- Titanium H-170

If you'd like to see a different color, please select other and specify in the comments. There will be an upcharge for using a color outside of our standard color ways.

If black nitride is selected, know that this is an out of house process. Turn around time is out of your control, but the average turn around time is 4 weeks.

If you don't see the footprint or the firearm that you're looking for, please reach out. We are always looking to expand our options.