This is for mounting any optic with the Holoson 407k/507k/EPS/EPS Carry onto an applicable H&K®. The Holosun K-series footprint is similar to the RMSc fooprint, but doesn't havethe recoil lugs at the rear of the optic. Each H&K slide will require a unique service. As of current, here's what you can expect for your slide model:
P2000, P30, and HK45 - This slide can only be cut to a depth of 0.090" (0.125" for the HK45) due to the lightening pocket underneath. This will also use #4-40 screw with threaded bosses, which the screws will be provided. This helps keep the most thread engagement possible and allows for two more locating features. The rear iron can stay in its OEM position, if you'd like. *Due Note, Angry bear currently does not offer irons for the P2000*.
VP9/40 - This will be cut 0.170” deep into the slide and 0.050” in front of the OEM rear iron sight position. The holes will be drilled and tapped for #6-32 countersunk screws, which will be provided.
When shipping your slide, send the complete upper assembly, to include the barrel and recoil spring. This will allow us to verify the fit of the red-dot against the other components. If you send the slide with new iron sights, we'll install them for free. DO NOT SEND THE LOWER PART OF YOUR FRAME.
Sometimes iron's can be damaged during removal and installation (rarely with H&K's, but it can still happen). Any service requiring finishing will need to have them removed. We will not be held liable for any damaged iron sights if they need to be removed in order to service your slide.
Please send your red dot with your slide. From our experience, every red dot is a little unique. We want to ensure you get the best possible fit.
**NOTE** Due to the design of the iron sights, there is potential of damaging them during removal, particularly the front iron sight. We'll do the best we can to protect the sights, but we will not be held responsible for replacing them if damaged. If you choose to have your rear iron relocated in front of your optic. it will be cut to a glock style iron. For the best possible service, Please inlcude or inquire about getting some new ones installed at the same time.
Check out our Shipping & Dropoff page for details on lead-time and how to ship items to us.
To keep things simple, we've chosen to use these cerakote colors:
If you'd like to see a different color, please select other and specify in the comments. There will be an upcharge for using a color outside of our standard color ways.
If black nitride is selected, know that this is an out of house process. Turn around time is out of your control, but the average turn around time is 4 weeks.
If you don't see the footprint or the firearm that you're looking for, please reach out. We are always looking to expand our options.
14 Reviews Hide Reviews Show Reviews
-
P30/EPS Cut
Second time I've went with Drew for getting one of my HK's cut, second time I've been thrilled with the results. Nice clean and tight cut the optic sits snug in, installed with correct torque, and a nice, even cerakote that didn't require me to rack my slide a hundred times to "wear it in" cause it was over applied. Very reasonable price, and a great turn around time to boot. Had it back in less than a month. Can't recommend enough.
-
P30
Sent in my P30 slide with an EPS. The cut, fit, and finish are by far too notch and I swear this cut is better and cleaner than the cuts I've seen from a shop that rhymes with Lamedom Tactical. Will definitely be sending more this way!
-
Amazing Work
Drew does amazing work. Attention to detail is his game. You will not be disappointed with selecting his services.
-
H&K P2000SK with Osight SR
The quality of the optic cut, new coating and especially the turnaround time was quite impressive. Drew's communication during this process was exceptional. I was pretty darn surprised when he sent me photographs of the finished slide via text message. The pics looked awesome, but in person it was an entirely different experience. Thanks again, Drew????
-
Excellent work and communication
High quality precision work. Excellent communication. Only the nitride process took longer but this is out of Drew’s control. Next one I will send to Drew is P226 Mk 25.
-
Perfect optic cut
Optic cut came out perfectly. Had my VP9 slide milled for a holosun EPS. Great communication during the entire process and a fast turnaround. Strongly recommended.
-
P2000sk / osight se milling
Excellent work and great turnaround time start to finish, slide looks great, saved around $140 over hometown gunsmith, Drew is a great communicator , I highly recommend Drew and his work if your looking for slide milling!!!!
-
H&K P2000
Awesome job from Vigilante. Very pleased with the depth and quality of the cut, highly recommend their work.
-
Finally an optic solution
The eps cut and cerakote job are perfect! I didn’t even need to rezero. So happy to be able to run a red dot on my p2000. Thanks Drew!
