This is for a Holosun K-series (407K/507K/EPS/EPSCarry) or RMSc cut on your CZ Slide. Your optic will be required at the time of milling to ensure you get the best service possible. Each CZ slide will require a unique service. As of current, here's what you can expect for your slide model:
P10 S/C/F - Rear iron can stay in its OEM position, if you'd like. Cut depth is 0.220" at the front of the Pocket and can be shallower if requested.
P07/P09 - Rear iron can stay in its OEM position, if you'd like.
Shadow 2 - This slide must be cut at a slight angle to accommodate for the optic MOA adjustment. You'll see approximately a 0.035" height difference from the front and rear of the cut. The rear iron must also be removed, but there is enough room to install a Glock style rear iron. Dawson Precision Glock MOS with a height of 0.375 works with the front factory iron at 10yrds. SKU 018-702 for black, SKU 018-767 for fiber optic.
P-01/SP-01 - This is similar to the Shadow 2. It will also need to be milled at a slight angle and have the rear irons removed. Factory rear iron can be kept, if you'd like.
**NOTE** Due to the design of the iron sights, There is potential damaging the during removal. We'll do the best we can to protect the sights, but we will not be held responsible for replacing them if damaged. For the best possible service, Please include or inquire about getting some new ones installed at the same time.
When shipping your slide, send the complete upper assembly, including the barrel and recoil spring. This will allow us to verify the fit of the red-dot against the other components. If you send the slide with new iron sights, we'll install them for free. DO NOT SEND THE LOWER PART OF YOUR FRAME.
Please send your red dot with your slide. From our experience, every red dot is a little unique. We want to ensure you get the best possible fit.
Check out our Shipping & Dropoff page for details on lead-time and how to ship items to us.
To keep things simple, we've chosen to use these cerakote colors:
If you'd like to see a different color, please select other and specify in the comments. There will be an upcharge for using a color outside of our standard color ways.
If black nitride is selected, know that this is an out of house process. Turn around time is out of your control, but the average turn around time is 4 weeks.
If you don't see the footprint or the firearm that you're looking for, please reach out. We are always looking to expand our options.
